Harman Kardon AVR 260

Harman Kardon

The Harman Kardon® AVR 260 combines ease of use with sophisticated features for the best in digital sound. With advanced surround-sound technologies(includingDolby,DTS® and Logic 7 processing) and Faroudja DCDi Cinema video processing with upscaling up to 1080p, the AVR 260 ensures an optimal user experience. Plus, with EzSet/EQ equalization,the system is just as easy to set up as it is to listen to.

Key Specifi cations :

Audio Section – Continuous Average Power (FTC), (stereo mode): 65 watts per channel

into 8 ohms @ 20Hz – 20kHz, <0.07% THD, both channels driven; (seven-channel

surround mode): 120 watts per channel into 6 ohms @ 1kHz, <1% THD, one channel

driven; 50 watts per channel into 8 ohms @ 20Hz – 20kHz, <0.07% THD, all channels

driven; High Instantaneous Current Capability (HCC): ±35 amps

Tuner – Usable Sensitivity: IHF 1.3μV/13.2dBf; THD at 1kHz with 100% modulation, (mono):

0.2%; (stereo): 0.3%; FM Adjacent Channel Selectivity: ±400kHz, 70dB; Ultimate

(maximum) S/N Ratio (measured at 1mV RF input level), (mono): 70dB; (stereo): 68dB

Dimensions (H x W x D) and weight : 165mm x 440mm x 382mm, 12.3kg

Power

• 120W x 7 into 6 ohms, 1kHz, at <1% THD, one channel driven

• 50W x 7 into 8 ohms, 20Hz – 20kHz, at <0.07% THD, with all channels driven simultaneously

• High-current (±35 amps), ultrawide-bandwidth (10Hz – 100kHz) amplifi er design

Surround Processing

• Full suite of Dolby surround decoding, including Dolby TrueHD and Dolby Digital Plus using an advanced Cirrus Logic®

CS 49700 32-bit DSP processor

• Full suite of DTS modes, including DTS-HD,™ DTS-HD Master Audio, DTS-ES® 6.1 Discrete & Matrix, DTS Neo:6®

and DTS 96/24™

• Dolby Pro Logic® IIx (Movie, Music and Game modes) surround sound

• Harman-exclusive Logic 7 Movie, Music and Game surround sound processing in 5.1 and 7.1 channels

• Headphone and Virtual Speaker surround modes

• Five- and seven-channel Stereo, Hall and Theater surround modes

• 192kHz/24-Bit DACs

Connectivity

• Three HDMI inputs and one HDMI output with 12-bit Deep Color and xvYCC pass-through

• Two assignable, wide-bandwidth (50MHz), HDTV-ready component video inputs and one output

• Subwoofer output for direct connection to a powered subwoofer

• Four A/V inputs with S-video, plus two audio-only inputs

• Eight-channel-direct inputs for use with external surround decoders

• 7.1 Preamp outputs allow the use of external amplifi ers

• Convenient front-panel audio/video input with S-video for use with video games or portable players

• Six digital inputs (two optical and two coaxial on rear panel, and one optical and one coaxial on front panel)

• One coaxial digital output on rear panel

• RS-232 port for fi rmware upgrades

• IR remote extension jacks for control of the amplifi er when placed in a cabinet

• Auxiliary input for connecting portable media players

Ease of Use

• HDMI with audio processing and Faroudja DCDi Cinema video processing with upscaling to 1080p

• Adjustable A/V Sync Delay

• EzSet/EQ equalization for quick and accurate system setup

• FM stereo/AM tuner with 30 presets and direct-access tuning

• Quadruple-crossover bass manager

• Wide range of low-frequency crossover points (40Hz, 60Hz, 80Hz, 100Hz, 120Hz and 200Hz) available

• Full-color, high-defi nition, graphical on-screen interface, including HDMI and component video

• Programmable power-up volume

• Multiroom audio

• Surround back amplifi er channels confi gurable for use as second-zone amplifi cation

• Seven-device, preprogrammed system remote control