JBL EON 210P

The EON210P consists of two 10-inch, two-way, powered loudspeakers, one with a detachable powered mixer and the other with a detachable storage compartment, one pair of unshielded speaker cables and a power cord. Capable of reproducing full bandwidth sound at high levels the 210P is comprised of a 250 mm (10 in) woofer, a 37.5 mm (1.5 in) neodymium high frequency compression driver coupled to a 100° H by 60° V waveguide driven by a 300 watt Crown® Class-D power amplifier and integrated mixer.

Specifications :

System :

System Type: Powered mixer with 2 two-way bass-reflex enclosures
Maximum SPL Output: 124 dB peak system output (pink noise)
Frequency Range (-10 dB): 60 Hz - 20 kHz
Frequency Response (±3 dB): 75 Hz - 19 kHz
AC input : 120 - 240 V 50/60 Hz, voltage selector switch sets operational range

Amplification :

Amplifier Design: Crown® Class D
System Power Rating: 300 Watts (2 x 150 W Stereo)
Output Connector: 2 x 1/4” TS (unbalanced) amplifier outputs

Mixer :

Input Connectors: 8 inputs (4 Mono Mic/Line, 2 x Stereo)
Channels 1-4 are XLR / 1/4” jack combo connectors, XLR is a mic level input,
1/4” is a line level input. 5-6, one pair of 1/4” balanced TRS jacks
(stereo), and a pair of RCA jacks (stereo). 7-8 is a 3.5 mm stereo jack
Input Impedance: Ch 1-4 Combo: XLR 3 K Ohms Balanced
Ch 1-4 Combo: TRS 20 K Ohms Balanced
Ch 5-6: TRS 25 K Ohms Balanced
Ch 5-6: RCA 12 K Ohms Unbalanced
Ch 7-8: 3.5 mm 30 K Ohms Unbalanced
Phantom Power: 30 V
Output Connectors: Monitor outputs: one pair of 1/4” balanced TRS jacks (stereo), and a
pair of RCA jacks (stereo)
Headphone output: one 3.5 mm stereo jack
Signal Indicators:
Main Output LED Ladder
Limit: Red LED indicates limiter active condition
Signal: Green LED indicates signal present
Signal Indicators: Ch 1-4 Peak LED: Green = signal present, Red = input overload
EQ: Individual channel Bass and Treble controls, center detent, +/-6 dB
cut and boost
System Limiter: On Board DSP Limiting and Tuning

Speaker :

LF Driver: 1 x JBL 328H 250 mm (10 in) woofer
HF Driver: 1 x JBL 2414H-1 37.5 mm (1.5” ) annular polymer diaphragm,
neodymium compression driver
Coverage Pattern: 100º x 60º nominal
Crossover Frequency: 2 kHz
Crossover Type: Passive network, 2nd order filters (-12 dB per octave)
for high pass and low pass filters
Enclosure: Polypropylene
Suspension/ Mounting: 36 mm pole socket with stabilizing screw
Handles: One on top
Grille: Powder coated perforated steel

Dimensions and Weight :
Shipping Package ( H x W x D ): 21.5” x 26” x 13.75” (546 mm x 660 mm x 349 mm)
Net Weight of System: 33 lbs. (19 lbs. for unit with powered mixer, 14 lbs. for unit with storage pod)

(cena je po komadu)